Skip to main content

Stonelink

Two different grading events

Buyers usually imagine one grade: the grade of the stone they receive. In reality there are two separate grading moments, and they are not the same thing.

This is why the same mill can quote one stone at five to ten times the price of another: it is not margin, it is block cost. And it is why a mill running better blocks can quote a lower price at identical slab quality — block grade is upstream of everything else.

What the commercial grade ladder usually looks like

Names vary by quarry and by supplier, but the structure is fairly consistent. A typical white-marble ladder, with relative cost indices:

These indices are illustrative rather than universal. The point is the shape of the curve: moving down one grade typically saves a fifth to a third of material cost, and the saving is paid for in consistency, resin demand and cutting waste.

Why the same name is not the same stone

Commercial stone names are trade names, not geological identities. One name can cover several grades, which is why two quotes for “Statuario” can differ enormously and both be honest.

The reliable way to compare two offers for the same name is to stop comparing names and compare the slabs:

  • Slab size — small slabs waste more in cutting and produce more visible joints
  • Colour consistency across the lot — not across one showroom sample
  • Resin demand — heavy resin filling often signals micro-fissuring
  • Thickness and tolerance — thin or uneven stock changes both cost and installation
  • Number of slabs in the lot, and whether they are consecutive — critical for bookmatching and vein continuity

The yield maths behind the grade

Grade is really a prediction of how much of the block becomes sellable slab. The spread is wide:

  • Clean block: about 85–90% of block volume converts into saleable slabs
  • Fractured block: closer to 60%
  • A good-sized block yields roughly 55–60 slabs at 2 cm

Every slab that cracks during sawing redistributes its cost onto the surviving slabs. That is the mechanism behind a quote that looks suspiciously low: it is not generosity, it is a supplier pricing off a worse expected yield and hoping the fractures land outside your lot.

Downstream, expect further loss after the stone reaches your market. Dressing and cutting to room dimensions typically costs 10–20% on imported marble and around 8–12% on smaller-format material, with bookmatching and vein alignment at the upper end. A grade that arrives cheap and wastes 20% is not cheaper.

How to specify grade so it is enforceable

  1. Name the acceptance basis. State that acceptance is on numbered slab photos or video before loading, not on grade labels.
  2. Define the lot. Quantity in m², slab count, thickness, and whether slabs must be consecutive from one block.
  3. State the finish and the resin position. Say whether resin-backed is acceptable, and ask for the resin to be disclosed rather than discovered.
  4. Set the tolerance. Thickness tolerance and how it will be measured.
  5. Fix the rejection rule in advance. What percentage of off-grade slabs is acceptable, and what happens above it — replacement, credit, or rejection of the lot.
  6. Require a loading record. Crate list matched to slab numbers, plus photographs of the loaded container.

A vague “Grade A” request leaves all six of these open, which is exactly how two parties end up looking at the same container and disagreeing about what was bought.

What to do with a request like “1,400 m² of Grade A”

This is the single most common enquiry pattern we see, and it cannot be quoted honestly as written, because grade and volume interact with block availability. Before a number can be given, four things have to be settled:

  • Which stone, and which look within it — the reference image matters more than the name
  • Thickness and finish
  • Whether vein continuity or bookmatching is required — this changes how many blocks are needed, not just how many slabs
  • Delivery schedule — one lot or phased, because block availability moves

Suppliers who quote a firm number without asking any of these are quoting a placeholder. The number will move once the slabs are selected.

Frequently asked questions

Is Grade A a recognised international standard?

No. There is no universal grading standard for decorative stone equivalent to, say, a timber grade. Grade labels are set by quarries, auctions and individual mills, which is why the same label means different things between suppliers. Insist on slab-level approval instead.

Why is one supplier 30% cheaper on the same stone?

On commodity stones, serious mills quote within a tight band. A quote 30% below that band usually means worse blocks, thinner or heavier resin, smaller slabs, or a placeholder figure that will be revised later. On premium stones, wide spreads are legitimate because block quality varies enormously.

Can a mill upgrade a low-grade block?

Not in any meaningful sense. Resin can fill micro-fissures and mesh can reinforce thin stock, both legitimate processes, but neither changes the underlying colour consistency or vein structure that set the block grade at auction.

Does resin backing mean the stone is bad?

Not necessarily. Most commercial marble is resined to fill micro-fissures, and glass-fibre mesh backing lets 18 mm stock perform where unreinforced 20 mm would be specified. The red flag is undisclosed resin on a lot sold as premium, or resin used to disguise fracturing rather than stabilise it.

How much waste should I budget for?

For imported marble, plan on 10–20% between purchased area and installed area once dressing and room cuts are counted, more if you are bookmatching. Cut-to-size from the factory shifts some of that waste upstream and can reduce it.

Should I buy by the slab or by the square metre?

Slabs, wherever the project involves veining, bookmatching or large continuous areas. Buying area alone gives the supplier freedom to fill your order with smaller pieces that meet the number but not the design.

Send us the look, the quantity and the thickness, and we will come back with numbered slab photos and video from current stock before you commit. Request a quote.

Leave a Reply

Your email address will not be published. Required fields are marked *