EU PPWR (Regulation (EU) 2025/40) has applied since 12 August 2026 and covers every packaging material placed on the EU market — including the wooden crates and pallets stone ships in. Three obligations bite immediately: the sum of lead, cadmium, mercury and hexavalent chromium must be ≤100 mg/kg, the packaging must be recyclable, and a EU Declaration of Conformity plus technical file must exist and be producible within 10 working days. Customs can detain shipments that cannot show them.
What PPWR actually is
The Packaging and Packaging Waste Regulation, Regulation (EU) 2025/40, was published in January 2025 and entered into force in February 2025. From 12 August 2026 its core obligations apply. It replaces the Packaging and Packaging Waste Directive 94/62/EC, which had been in place for nearly thirty years.
The change in legal instrument matters. A Directive had to be transposed into national law, so deadlines and interpretations varied by country. A Regulation applies directly and identically in all 27 Member States (and Northern Ireland). There is no national grace period and no local interpretation to negotiate.
Does it apply to stone crates?
Yes. PPWR covers packaging of all materials — wood, plastic, paper, metal, glass and composites — and all scenarios, including industrial and transport packaging. The legal test is whether an item is used to contain, protect, handle, deliver or present a product. Wooden crates, skids, pallets and dunnage all meet that test.
A point that trips up a lot of exporters: PPWR and ISPM 15 are separate regimes and both still apply. ISPM 15 is a plant-health rule about treating raw wood so pests do not cross borders. PPWR is a packaging-waste rule about what the packaging is made of and what happens to it afterwards. A crate can be perfectly compliant on ISPM 15 and still fail PPWR.
The obligations, and when they start
| From | Requirement | What it means for a stone shipment |
|---|---|---|
| 12 Aug 2026 | Heavy metals: Pb + Cd + Hg + Cr(VI) ≤ 100 mg/kg | Applies to every packaging component, including inks, coatings, adhesives and plating. No exemption. |
| 12 Aug 2026 | Packaging must be recyclable | Design-for-recycling obligation. Grading thresholds arrive later; for now a recyclability statement is the practical deliverable. |
| 12 Aug 2026 | Conformity assessment, technical file, EU Declaration of Conformity | Keep 5 years for single-use packaging, 10 years for reusable. Produce within 10 working days on request. |
| 12 Aug 2026 | EPR registration | Whoever first places the packaged product on a Member State market is the “producer”. Non-EU businesses must appoint an EU authorised representative. |
| 1 Jan 2030 | Recyclability grading A/B/C (≥95% / ≥80% / ≥70%) | Below C grade cannot be placed on the market. |
| 1 Jan 2030 | Minimum recycled content in plastic packaging | Affects plastic packaging. Wooden crates are not subject to the PCR minimums. |
| 1 Jan 2030 | Void-space limit of 50% on sales packaging | Pure transport packaging is not covered by this clause. |
| 1 Jan 2038 | Only grade A and B packaging may be placed on the market | Effectively a design deadline for packaging used on EU-bound goods. |
Who carries the obligation — and what that means if you ship FOB
PPWR puts the main producer responsibility on the economic operator that first places the packaged product on a Member State market. On a typical FOB sale to a European importer, that is usually the importer, not the Chinese mill. But the importer can only meet that obligation if the supplier feeds them the right paperwork.
In practice the split looks like this:
- The EU importer — EPR registration in each Member State where the packaging becomes waste, plus declaration of volumes and payment of recovery fees.
- The exporter — supplying a Declaration of Conformity, the supporting technical documentation, and material evidence for the crate, film, strapping and inks actually used.
Which party is formally the producer depends on the Incoterm and on how the contract is written, so agree it in writing before the order rather than at the port. What is not negotiable: if you cannot produce a DoC and test evidence for your crate, your buyer’s shipment is the one that gets held.
What to demand from your crate supplier
- A component list for the finished crate — runners, panels, cleats, blocks, dunnage, strapping, stretch film, and any printed ink or label stock. Every one of these is a packaging component.
- Heavy-metal test reports covering the four restricted metals, reported as a sum in mg/kg. Ask for the sum, not four separate “pass” lines.
- A statement on recycled content and recyclability for the crate as placed on the market.
- Confirmation that the ISPM 15 treatment mark is applied by an authorised operator, on the finished crate, legible on at least two opposite sides.
- A written commitment on repairs. Replacement timber added to a marked crate cannot ride on the old mark; re-treatment and re-marking must go through the authorised system.
Watch the inks. The IPPC mark itself is stamped, but shipping marks, labels and any printed crate panels are packaging components too. A crate that passes on timber can still fail on the ink.
What to hand your European buyer
- EU Declaration of Conformity for the packaging, referencing Regulation (EU) 2025/40
- Technical documentation: crate specification, component list, material sources
- Heavy-metal test reports, ideally matched to the crate batch
- Recyclability statement
- ISPM 15 treatment evidence tied to crate numbers and to the loading photo set
Send these before the container sails, not after. Once the goods are on the water, correcting a missing declaration means delay at destination, and delay on a stone shipment is rarely cheap.
Enforcement is already running
Member States enforce PPWR, and the strictest scrutiny is reported in Germany, France and the Netherlands, where checks tend to be category-wide and on-the-spot correction is generally not offered. Rotterdam and Hamburg have been reported running packaging compliance spot checks. Penalties can reach 4% of global annual turnover, and persistent non-compliance risks exclusion from the market.
The practical lesson from the first month is not that enforcement is harsh — it is that the paperwork is checked, not the intentions. A crate that is physically fine but undocumented is the failure mode to plan against.
Frequently asked questions
We already do ISPM 15. Is that enough?
No. ISPM 15 is plant health. PPWR is packaging waste and material composition. They are separate legal bases, checked by different authorities, and you need both.
Does the 100 mg/kg limit apply to the stone itself?
No. It applies to the packaging and its components, not to the product being packed. Natural stone is not in scope of the heavy-metal limit.
Do the plastic recycled-content rules hit wooden crates?
No. The minimum post-consumer recycled content requirement targets plastic packaging. There is a narrow exemption where a plastic part is under 5% of the total packaging weight and under 100 g in absolute terms — worth knowing if you use plastic strapping, corner protectors or film.
What about crates already built before 12 August 2026?
The Commission’s FAQ clarified the stock position: packaging already placed on the market before the application date can continue to be sold through. Packaging produced but not yet placed must meet the applicable rules before being placed on the market, and stock that fails the harmful-substance limit cannot be placed at all. If you are holding old crates, get them tested before you use them on an EU order.
Do we need our own EPR registration as a Chinese exporter?
Generally the EPR obligation falls on the operator first placing the packaged product on a Member State market, which on FOB terms is normally your importer. But a non-EU producer must have an EU authorised representative where they carry producer responsibility, and either way you must be able to supply the DoC and technical file. Confirm the allocation in the contract.
How long do we keep the documentation?
Five years for single-use packaging, ten years for reusable packaging, and you must be able to produce it within 10 working days of a request from the authority.
Related reading
- Stone Certifications Explained: CE, SGS, ISO & What B2B Buyers Should Request
- FCL vs LCL Shipping for Stone: Which Saves More and Breaks Less
- Stone Container Shipping: How Many Slabs Fit & Port Guide
- Total Landed Cost of Imported Stone: Beyond the Factory Price
- Stone Supplier Red Flags: How to Avoid Low-Price Traps & Quality Risks
- 7 Questions to Ask Before Choosing a Natural Stone Supplier
Shipping to Europe this quarter? Send us your destination port and crate spec, and we will confirm which documents we can issue with your order. Request a quote.